Support VeloMap.org Website and Map development
I spend a lot of time working on the maps, working on this homepage and working on the OSM wiki/forums in order so that everyone can enjoy nice maps for cycling
If you want to support me in doing that, then please pay for a membership to help me to continue developing.
You Get in Return (as a member):
- Quick Support via comment function ( I usually answer within a few hours, and nearly always under 2 days…)
- Exclusivemaps (openmtbmap & velomap):
- Single map of Europe including contourlines of complete Europe
- North America (including contourlines): United States (5 parts), Canada
- South America country maps for most countries (including contourlines)
- Australia, New Zealand, New Caledonia all including contourlines (and also a contourlines file for all Australia-Oceania)
- Contourlines for Africa and Asia country maps
- Contourlines for South-America, Central-America and Africa and Asia and more – you get contourlines for all maps offered here (all except Asia as continent are integrated and simply need to be copied into the map folder).
- Exclusive Mac OSx format maps (openmtbmap & velomap):
- All countries and continents now available for download also in gmap/gmapi format (of course including contourlines). Easy installation in Garmin Basecamp for Mac.
- and in future (hopefully) to an online support forum and video tutorials (planned soon).
Note1: The login only works for either Velomap or Openmtbmap (depending where you pay), but the premium downloads are always available for both Openmtbmap/Velomap from the site you paid. You can still post comments/questions specific to Velomap in the Velomap section on Openmtbmap and vice versa (this is due to both websites having different databases. People who pay 50€ or more, may email me and I manually copy the login to both sites.)
Note2: if you already paid in the past / have an login and would like to extend your membership, please login, then you will see the options!
After payment you get a link sent by mail which enables you to create an account on VeloMap.org. With this account you can access the premium sections/downloads and you can use the reply function on all pages, I’ll try to answer all questions. If you don’t receive an email for login within 5 minutes after sending the payment, please look into your Spam folder. There are 2 Options 1. First year support/access to downloads for €20, then € 13 for each year. You can cancel the payment whenever you like on Paypal. (needs a credit card linked to your Paypal Account.). If you don’t cancel before the year is over, the payment will continue each year – It’s a subscription. 2. Pay for a fixed term. 20€ for 1 year, 35€ for 2 years … and so on. See the dropdown box. Just choose amount/time and fill out – your username/password is directly created! I actually never get your credit card data – Your credit card information is securely handled via Stripe. Also possible to pay with Visa debit and Mastercard debit card, but not with Maestro. (I’m sorry that I need to ask for your location – this is due to EU VAT laws effective since 2015). I actually never get your credit card data – Your credit card information is handled via Stripe. Once you entered your payment info – and click on “submit form” – you’re payment is carried out and you get instant access to VeloMap. (Yearly subscription only possible using Paypal) Sorry – thanks to the EU VATMOSS rules I cannot offer payment via simple Bank transfer for now. There is one workaround though – you can open up a Paypal Account – wire money to it, and then use it to pay (no subscriptions – one time payments only without credit card). I really dislike this situation – but cannot change it for now as otherwise my administrative burden is far too high. I’m not a fan of PayPal at all (that’s why the default gateway is Stripe) – but for now there is no better possibility if you have no credit card – or don’t want to use your credit card online. For people who do not want to pay via Paypal/Credit Card, I have opened up a bank account. In case you want to receive a membership please wire the money, and send me an email with your requested Username. (note as it usually takes 2 working days for the money to be credited to the bank account I will send you your login data 2-4 days later). Once the money is credited to my account, I will send you an email with your login data ( 2-4 days later). You can also put your requested Username and your email into the reference text (replace “@” with “AT” as @ is not allowed on the reference form), this makes it easier for me. (if you don’t receive an account within 5 working days, drop me a mail (my email is felix At openmtbmap.org). 20€ gets you 1 year, 35€ 2 years, 45€ 3 years, 55€ 4 years, 80€ 8 years, 100€ or more lifelong (as long as I run openmtbmap.org) Membership Access. new bank account data soon. Please don’t use the old account data anymore – due to neu EU Vat regulations as of 1.1.2015 (see more about it on #Vatmoss on Twitter for example). I am working hard on offering a new solution to pay/donate via bank transfer. Pay via Paypal
Pay with Credit or Debit Card
Pay via Bank transfer
My bank account data is:
Wie kann ich meinen Account bei dir deaktivieren/löschen lassen?
Sorry,
Tomaten auf den Augen!
Gruß, Rohloffbiker
Hallo wie kann ich die Premiumkarten kündigen?
Hallo Frank – direkt in deinem Paypal Account (info 2013) – Link/Anleitung dazu ist hier: http://www.velomap.org/de/cancel/
lg Felix
Hello Felix
Thanks for your help. Dragging the cursor to cover the complete map area required has solved my problem of missing map areas.
Thank you
Regards
Andrew
Hello Fellx
Thank you for your advise, I have been using your maps with under 1000 tiles(maps) but possibly not dragging to cover the complete area I require, I will try again
Many thanks
Andrew
Hello
I am using a Garmin 810. I hope to ride from santander across northern Spain, southern France, northern Italy, then through Slovenia, Austria to Prague. When I load these tiles from Europe map to an 8 or 16GB microsim, part of the maps are missing on the Garmin display.(The data amounts to less than 3GB). If I load the individual countries, one or two of the countries is missing on the Garmin displayed map.( I suspect this is due to the size of the maps beingclose to or just over 4GB) I am able to load the combined Italy, Slovenia, Austria and Czech Republic onto one microSim, and Spain and France on another microSim and when plugged into the Garmin, both display as planned. I would like to have a complete map on the one microSim card and have the whole area displaying rather than having to change microSim cards half way through the trip. Do you have any thoughts on how this can be done.
Kind Regards
Andrew
Hi Andrew
Make sure to disable all other maps – also maybe make sure that you have not over 4048 map tiles on your device. Maybe your need to remove some maps first. If you load individual countries you cannot route over borders – and one map will overlay another with empty white area. So either 4048 tiles, or empty white overlap is your problem I guess.
OR – when selecting make sure to always select with dragging over the full area you need – else on the outside you may have only contours or map data – but not both. So best remove all maps – then send the full area you need from the Europe map (you can go to 4GB no worries)
disabling a map – does not remove it from the 4048 tiles count. Maybe you have some other map with very small tiles? My Europe map has around 2000 tiles overall for all of Europe as reference.
Hallo,
ich habe ein Problem beim Download der Höhenliniendatei für Asien. Die heruntergeladene Datei ist nicht mehr als 9gb gross, wie angegeben, sondern nur 7,8 und lässt sich daher natürlich nicht installieren. Auch mehrmaliges herunterladen funktioniert nicht. Platz ist auch genug auf der HDD. Was tun?
Grüsse
Bernhard
Probier es bitte mal mit anderem Computer – evtl ist da der kaputte Download gecached. Evtl sogar mit anderem Internetzugang (möglichst recht schnell) – der Download hat definitv 9.6GB
Hallo zusammen,
seit kurzem besitze ich das Germin Edge 1030. Auf diesem sind bereits die mitgelieferten original Garmin Karten vorinstalliert und ich möchte zusätzlich auf dem Edge noch die velomaps alps und die openmtbmap alps installieren.
Leider kann ich auf dem Garmin nur die velomaps alps Karte installieren, bei der Installation der MTB-Karte Alps kommt immer eine Fehlermeldung, dass diese nicht installiert werden kann. Obwohl noch genügend Speicherplatz hierfür auf dem Gerät vorhanden wäre.
In Bascamp habe ich die die beiden aktuellsten Versionen der Alps-Karten installiert.
Ich verwende die OSX-Karten und habe die die aktuellsten Versionen von Basecamp und Mapinstaller installiert.
Über Eure Hilfe, wie ich die openmtbmap alp installiertt bekomme, bzw. wo der Fehler liegt bedanke mich mich schon vorab für Eure Hilfe.
Viele Grüße
Matthias
Das Problem liegt an der akutellsten Version von MapInstall – Downgrade auf 4.1.2:
https://www.velomap.org/de/tutorials/basecamp-4-7-0/
Hallo Felix,
vielen Dank für die schnelle Antwort! Dein Tip mit dem Downgrade auf MapInstall 4.1.1 hat mein Problem gelöst und ich konnte nun beide Velomaps-Karten auf dem Edge installieren.
Viele Grüße
Matthias
Hi Felix,
Excuse me for the mix up hierbelow. One problem is thus de europe map that does not work. But I also can not get de maps into my Gramin device. It starts to transfer the files but at a certain point de installation goes very fast and finishes without completing (I guess).
Looking forward to your comment.
Regards Jeroen
“Hi Jeroen – on which map?
That is either installation error (e.g. on Europe map parts not from same date, or outdated contourlines) – or actually a map error (but current Europe map should be fine – if it’s europe reinstall/redownload).”
Hi Felix,
I have reinstalled europe but I still get the same message. I installed Germany and that works fine…
Hope you have a sollution.
Regards.
Hi Felix,
I have reinstalled europe but I still get the same message. I installed Germany and that works fine…
Hope you have a sollution.
Regards.
There really must be some problem with your installation – best check the MD5 checksums of your installed parts and compare them with the supposed checksums. I’m pretty sure you use something like English language Installer with Local language mapfiles, or you used unicode installer (.gmap) with non unicode mapfiles.
Can you autoroute over short distances on the Europe map? it could be that a single tile is defect – but then selecting another region of the Europe map and sending it would be fine.
Jeroen Peeters
Wednesday January 9th, 2019 at 09:38 PM · Reply
Hello Felix,
When I tried to install maps on mij Oregon 700 Mapinstall gave the following message (I translated from Dutch in to English) “The card set is about 3.59 MB, but 11.2 GB is available at the destination.
Choose fewer cards and try again.”
I only have CityNavigator on mij Oregon and I have enough room to install.
Regards
Jeroen Peeters
extremecarver
Wednesday January 9th, 2019 at 10:50 PM · Reply
Hi Jeroen – on which map?
That is either installation error (e.g. on Europe map parts not from same date, or outdated contourlines) – or actually a map error (but current Europe map should be fine – if it’s europe reinstall/redownload).
January 16th
Hi Felix,
I have reinstalled europe but I still get the same message. I installed Germany and that works fine…
Hope you have a sollution.
Regards.
Hallo, ich bekomme die Velomap nicht installiert, habe mich nach der Beschreibung gehalten, aber über mapinstaller bekomme ich immer die Information:
“Beim Installieren von Karten auf dem Gerät ist ein Problem aufgetreten. Prüfen Sie, ob das Gerät angeschlossen und eingeschaltet ist, und versuchen Sie es erneut.”
Wie kann ich da vorgehen, benutze MacOS!
Bei welcher Karte? Normalerweise passiert dass entweder bei einem Kartenfehler (sehr selten) – oder wenn du beim installieren der Karte einen Fehler gemacht hast – kann bei der Europakarte etwa leicht passieren wenn Kartendaten und Installer verschiedene Version sind (Sprache, Unicode/Non Unicode, oder anderes Datum).
Probier mal etwas von einfacher Karte wie Deutschland oder Österreich ob da auch das Problem auftritt – wenn ja (also bei 2 verschiedenen Karten die nicht Europa sind) – dann liegt der Fehler beim Gerät selber – etwa falsch formatiert die mSD (muss FAT32 sein – siehe Tutorial – und nutze keine SDXC Karten sonst musst du extra aufpassen beim formatieren – siehe Tutorial für OSx).
Es handelt sich um die VelomapGermany MD5 in Europe Mac OSx Downloads, benutze Garmin Mapinstall 4.2.0 !
Also an der Karte liegt es nicht, habe bemerkt das ich nur einzelne Kartenteile runterladen kann, nicht die ganze Velomap, obwohl die mSD 32GB hat!
ah – daran liegt das Problem – du musst auf MapInstall 4.1.2 downgraden: https://www.velomap.org/de/tutorials/basecamp-4-7-0/
Hello Felix,
When I tried to install maps on mij Oregon 700 Mapinstall gave the following message (I translated from Dutch in to English) “The card set is about 3.59 MB, but 11.2 GB is available at the destination.
Choose fewer cards and try again.”
I only have CityNavigator on mij Oregon and I have enough room to install.
Regards
Jeroen Peeters
Hi Jeroen – on which map?
That is either installation error (e.g. on Europe map parts not from same date, or outdated contourlines) – or actually a map error (but current Europe map should be fine – if it’s europe reinstall/redownload).
Hallo Felix,
ich nutze seit mehreren Jahren erfolgreich die Velomap Europe auf meinem iMac. Heute habe ich ein upgrade auf basecamp 4.6.3 gemacht und die 3 neuesten Files für die Velomap Europe heruntergeladen. MapInst & MapMgr sind auf Version 4.2.0. Die Installation habe ich dann wie immer vorgenommen. (mac.os 10.14.2)
Folgendes Problem: beim Herauszoomen in basecamp verlieren die Kacheln/Tiles nach und nach ihre Karteninformationen und es bleibt nur noch das Höhenrelief. Beim Hineinzoomen ist es umgekehrt und die Tiles erlangen nach und nach ihre Karteninformation wieder.
Kennst Du das Problem? Wo liegt mein Fehler ?
Danke & Gruss / Andreas
evtl ein Cache Problem – bzw bist du sicher dass die Kartendaten wirklich zusammenpassen – und du nicht evtl nicht zusammenpassende Versionen ausgewählt hast (etwa englisch gmap, local language Kardendaten) – bzw aus versehen alten Installer bzw alte Kartdendaten reinkopiert hast?
Weiß ja nicht wie alt der IMac ist – aber probiere mal eine simple Länderkarte wie Deutschland ob da dasselbe Problem auftritt (wenn ja ist das Problem mal nicht die Karteninstallation an sich, außer Cache evtl, wenn die funktioniert hast du Cache Problem oder beim Installieren einen Fehler gemacht). Cache löschen siehe OSx Tutorial.
Hallo ihr lieben Menschen, also Garmin scheint mich nicht zu mögen- smile. Nun habe ich ein neues Gerät und mir das Wochenende um die Ohren geschlagen um mir Germany, Niederlande und Belgien runter zu laden und zu installieren. Eigentlich soweit alles o.k., nur, wenn ich die eingegebene Route navigieren will, bekomme ich die Antwort: Routenberechnungsfehler!? Ich kann die Orte und Routen sehen, nur bei “Los” meckert er. Hat jemand eine Idee? Danke und eine aschöne Advendszeit, enka-07
Bis du draußen und hast Empfang? Ansonsten musst du dich erstmal per GPS Simulationsmodus zum richtigen Ort bewegen. Ohne Empfang geht auch kein Los. Bzw evtl zu weit weg? Siehe auch hier: https://www.velomap.org/de/velomaporg/autorouting/
also richtig einstellen – und das Ziel darf nicht zu weit sein – ansonsten Via- Zwischenpunkte setzen. Wenn du eine Route woanders erstellst und auf los klickst – will das Gerät sonst erstmal zum Start navigieren.
Hallo extremecarver, danke asber das ist es nicht. Ich habe Vollausschlag vom GPS und bin der Ausgangspunkt der Route- also näher geht es kaum-smile. Eine OSM-Karte läuft?? l.G. enka-07
Was auch sein kann – die Route muss mit genau derselben karte geplant werden – wie sie am Gerät installiert ist – alles andere führt immer wieder zu Fehlern.
Teils kann es auch Probleme mit Punkten in der Karte geben – vor allem bei POI. Ist aber selten.
Hallo Felix,
Leider ist der Fehler noch nicht behoben, mir werden die Karten nicht zum Download angezeigt.
Die Seite mit strg+F5 aktualisiert, aus -und wieder eingelogt und die Sprache gewechselt, Rechner runter und wieder hoch gefahren….(Win10 & Firefox)
Gruß
Johannes
okay – hab nun nochmal was geändert – hoffe es geht jetzt.
Hallo Felix,
Bingo! Alles klar, download Europakarte funktoioniert wieder.
Vielen Dank für die schnelle Hilfe!
Grüß Johannes
Hallo Felix,
auch ich habe folgendes Problem beim Veruch die Europakarte downzuloaden:
Velomap Premium Mitgliedschaft
Hi Johannes Es wär ein Wahnsinn, wenn du weiterhin, ab und zu, VeloMap unterstützen könntest
Vielen Dank dass du einmal, oder schon mehrmals für Velomap Mitglieschaft gezahlt hast. Nur dadurch kann ich weiterarbeiten, und hier den Support leisten. Es wäre wirklich toll, wenn du auch bei bestehendem Account, jedes Jahr, oder jedes zweite Jahr etwas bezahlst.
Dein Account ist noch bezahlt bis: Access Expires: May 25th, 2019
(P.S. Falls du glaubst du hast länger gezahlt/hier besteht ein Fehler – dann melde dich bitte per email oder Kommentar)
Die Seite auch schon mit strg+F5 aktualisiert, aus -und wieder eingelogt und die Sprache gewechselt….
Gruß
Johannes
Hallo Johannes, ich hoffe ich hab das Problem jetzt gelöst. Wenn es noch immer nicht geht bitte nochmal aus/einloggen.
Hallo Felix,
auch ich habe folgendes Problem beim Veruch die Europakarte downzuloaden.
Hi Ralf Es wär ein Wahnsinn, wenn du weiterhin, ab und zu, VeloMap unterstützen könntest
Vielen Dank dass du einmal, oder schon mehrmals für Velomap Mitglieschaft gezahlt hast. Nur dadurch kann ich weiterarbeiten, und hier den Support leisten. Es wäre wirklich toll, wenn du auch bei bestehendem Account, jedes Jahr, oder jedes zweite Jahr etwas bezahlst.
Dein Account ist noch bezahlt bis: Access Expires: Sep 17th, 2043
(P.S. Falls du glaubst du hast länger gezahlt/hier besteht ein Fehler – dann melde dich bitte per email oder Kommentar)
Viele Grüße und ein schönes Wochenende
Ralf
Hallo Ralf, ich hoffe das Problem ist jetzt gelöst – wenn nicht nochmal aus/einloggen. Wenn dann immer noch nicht bitte nochmal um Notiz.
https://www.velomap.org/support/europe-map
https://www.velomap.org/de/download/openmtbmap/
Ich hoffe jetzt geht es.
Also die Premiumkarten. Es wird zwar der Downloadlink angezeigt. Klicke ich aber drauf, bekomme ich eine Zahlungsaufforderung.
Leider nicht, mir werden die Karten nicht mehr zum Download angezeigt.
https://www.velomap.org/de/support/membership/?_optimizemember_seeking%5Btype%5D=page&_optimizemember_seeking%5Bpage%5D=973&_optimizemember_seeking%5B_uri%5D=L2RlL3N1cHBvcnQvZXVyb3BlLW1hcA%3D%3D&_optimizemember_req%5Btype%5D=level&_optimizemember_req%5Blevel%5D=1&_optimizemember_res%5Btype%5D=page&optimizemember_seeking=page-973&optimizemember_level_req=1
Dass muss aber der Link sein nach Umleitung – wie schaut er vorher aus? Rechtsklick Link kopieren (nicht aus Adressleiste rauskopieren nach drauf klicken) – zumindest kann ich es mir nicht anders erklären – da die Links erst nach Klick verarbeitet werden.
Bzw wechsel mal sprache ob das was bringt – bzw log dich aus, und wieder ein ob es dann geht?
Hallo, hier scheint etwas nicht zu stimmem.
Hi Kai Es wär ein Wahnsinn, wenn du weiterhin, ab und zu, VeloMap unterstützen könntest
Vielen Dank dass du einmal, oder schon mehrmals für Velomap Mitglieschaft gezahlt hast. Nur dadurch kann ich weiterarbeiten, und hier den Support leisten. Es wäre wirklich toll, wenn du auch bei bestehendem Account, jedes Jahr, oder jedes zweite Jahr etwas bezahlst.
Dein Account ist noch bezahlt bis: Access Expires: Sep 9th, 2019
(P.S. Falls du glaubst du hast länger gezahlt/hier besteht ein Fehler – dann melde dich bitte per email oder Kommentar)
MIt freundlichen Grüßem
Kai Wahls
Hallo Kai, bitte mal um den Link (rechtsklick kopieren) auf dem du umgeleitet wirst. Du bist nicht der einzige aber ich kann es derzeit nicht nachvollziehen.
I have a current subscription to Velomap and I’m logged in. When I try to get to the Europe map download page, I get taken to a page telling me that “Your Account is active until: Access Expires: Nov 14th, 2019” and asking for more money, with no download link that I can see.
Can you please copy in the link as it’s shown that gets you to the donation page wrongly?
The link is pretty long:
https://www.velomap.org/support/membership/?_optimizemember_seeking%5Btype%5D=page&_optimizemember_seeking%5Bpage%5D=973&_optimizemember_seeking%5B_uri%5D=L3N1cHBvcnQvZXVyb3BlLW1hcA%3D%3D&_optimizemember_req%5Btype%5D=level&_optimizemember_req%5Blevel%5D=1&_optimizemember_res%5Btype%5D=page&optimizemember_seeking=page-973&optimizemember_level_req=1
I tried both Chrome and Firefox – same behaviour on both.
I cannot understand how this link comes up. This is once you are redirected – I need the link if you right click the link and copy it – how does it look like? I created a test user (so that I’m not admin and everything looks fine).
When I right-click on the Europe map download link and copy it, what I get is https://www.velomap.org/support/europe-map. But when I click on the map download link, the page it takes me to is the previous link I gave – https://www.velomap.org/support/membership/?_optimizemember_seeking%5Btype%5D=page&_optimizemember_seeking%5Bpage%5D=973&_optimizemember_seeking%5B_uri%5D=L3N1cHBvcnQvZXVyb3BlLW1hcA%3D%3D&_optimizemember_req%5Btype%5D=level&_optimizemember_req%5Blevel%5D=1&_optimizemember_res%5Btype%5D=page&optimizemember_seeking=page-973&optimizemember_level_req=1
Hi Nick, I hope I have solved it now. Maybe you need to logout/login again.
Yes, it’s now fixed, thanks. I didn’t have to logout/login.
Hallo Felix,
danke für die schnelle Antwort, ich bin gespannt auf das Ergebnis.
Bei den Routing-Einstellungen habe ich jetzt die Mautstraßen ausgeschaltet, bin gespannt, ob ich trotzdem noch über’s Timmelsjoch darf ;-).
Mit der Einstellung “Kürzere Entfernung” habe ich keine guten Erfahrungen, die führt in Orten oft auf merkwürdige Abkürzungen, die zwar vielleicht en paar Meter sparen, aber wegen häufigem Abbiegen viel Zeit und Kraft kosten.
Viele Grüße
Stephan
Ja – echte Mautstraßen bekommen kein Mautstraßen Tag – da für Fahrräder ja normalerweise keine Maut gilt.
Hallo,
ich verwende die Velomaps seit langem und sehr gerne, meist fürs Rennrad. Nur an folgenden Stellen komme ich mit dem Routing nicht klar und brauche Hilfe:
Mit der Einstellung “Unbefestigte Straßen vermeiden” routen alle Programme und Navis (Mapsource, Basecamp, Garmin 62 und Edge 1000) auch über mit Trk oder Pth gekennzeichnete Wege. Scheinbar werden die als befestigt angesehen, obwohl sie das in der Regel nicht sind. Zum Beispiel von Sault zum Mont Ventoux kürzt Mapsource kurz hinter dem Ort zweimal über Pths ab, die alles andere als befestigt sind. Wie kann ich sie zwingen, nur wirklich befestigte Wege zu nutzen (mindestens G1 Trk)?
Und gibt es eine Möglichkeit, die Bundesstraßenphobie der Velomaps zu reduzieren? Oft navigieren sie statt einem kurzen Stück Bundesstraße einen langen Umweg auf Nebenwegen, manchmal auch ungeteert (s.o.). Außerhalb des Berufsverkehrs sind Bundesstraßen aber manchmal gut zu befahren.
Danke und viele Grüße
Stephan
Nutze kürzere Entfernung statt kürzere Zeit – dazu auch noch Mautstraßen vermeiden aktivieren!
Es stimmt allerdings dass dann trotzdem teils noch Tracks und Pathes genommen werden – nur im Modus Taxi werden sie das nicht. Da Taxi bei neueren Geräten nicht mehr auswählbar ist – habe ich das jetzt ab nächstem Update geändert. Dann werden path und track im Zweifel außer wenn sie Teil einer Fahrradroute sind – nicht mehr genommen wenn unpaved vermeiden aktiviert ist.
Highway=unclassified und highway=cycleway lasse ich jedoch im Zweifel (sprich kein Zustand angegeben) als befestigt drinnen.