Well so after a few weeks without notices here comes a big update and notice. As this update will be the last one that is based on CCBYSA 2.0 data (acutally the same data as last week) I have put a lot of effort in creating maps with as few errors as possible, and best usability.
Contourlines now Worldwide Available:
There are now contourlines for: Slovenia, Ukraine, Turkey, Estonia, Hungary, Croatia, Latvia, Bulgaria, Lithuania, Serbia, Cyprus, Malta, Isle_of_Man, Azores, Faroe_Islands, Liechtenstein, Andorra, Monacco and Macedonia.
And outside Europe: Iceland, Morocco, Madagascar, Israel and Palestine.
I'll still add over the folowing days contourlines for Albania, Kosovo, Bosnia-Herzegovina inside Europe (then all Europe country maps have contourlines) and Somalia, Libya, Tanzania for Africa.
Well and my longtime goal was to provide contourlines for the whole world and with the above list only one big country/continent is missing. Namely Asia. But even with 25m intervals instead of 20m intervals, the full Asia contourlines amount to a whopping 9.4GB or 6GB 7zipped ( get it here ) , but will not integrate it into the map of Asia. You can of course install it into Mapsource/Basecamp/Qlandkarte GT and select areas out of it that you need. Just be careful not to select too much (4GB max size problem, 2000 tiles max on your GPS problem – as Asia contourlines complete is 1160 tiles). There is no installer and I assume if you want to use it, you know how to use them (tdb and overview img are of course included).
Next week I'll upload Asia in three parts (31-80°; 80-130° and 130-180°) so size/download is smaller. Of course this will also not be integrated.
I'm also heavily working on removing the few bugs remaining in Austria/Germany (and consequently Alps) contourlines. For France this is done already so the contourlines of France for this update have to errors less.
Other Improvements:
I spend quite a lot of time to iron out errors, especially on the address search (e.g. address search in Berlin, Hamburg, Bremen or Wien should work now as expected). So address search should work better on all Europe country maps. Also I used a european coastline file, so sea has less holes (and I hope no flooding at all). I too again went through most used keys for natural and landuse, and included some common misspellings and some new values. Other things I added were some more food values (e.g. swabian food), natural=col/natural=saddle and scenic=yes for autorouting priority.
Well and also other errors have been corrected over the last few weeks (e.g. up to middle of March, if you selected to include a contourlines only map, but not integrate the contourlines into the map, the contourlines only map would be blank and other small annoyances). Also some improvements to the Desktop layout were done and I did further work on the naming of skislopes and included big skislopes also again into the Velomap.
BTW: many European countries have by now already very very good coverage. In quality OSM maps have always been great, but also in data quantity in many countries second to last generation of Garmin maps have been overtaken. E.g. Austria is 225MB now including contourlines, vs the best Austrian map of Garmin (Topo Österreich 1.11) at only 170MB – as the newest Topo Austria is including so much junk data that it became unusable. Even with autorouting data excluded at 179MB, the Openmtbmap Austria is still bigger than the Topo Austria 1.11. Also Germany with currently 1.3GB is approaching the 1.55GB of the Topo Germany v2/v3 (which is more or less identical if the Digital Elevation Model is taken out). France is similar and in the BeNeLux the quantity of OSM data is anyhow mostly superior to any other topo maps.
Oh yeah, and I haven't forgotten the promised tutorial videos. They will come pretty soon….
Future Updates under Odbl:
Well now the change to Odbl data is more and more complete. Soon Geofabrik should go online with "cleaned" new data. As there will be many many holes and data quality at least for the first few month degraded, I will leave the CCBYSA maps of tomorrow online for the next 3-12month (depending on the country, if needed longer). If There is a chance to get country extracts of CCBYSA 2.0 from FOSM I will use that data to update the CCBYSA 2.0 maps sporadically also in future.
In order for you to find the separate maps, as soon as I have rendered odbl compatible maps, I will setup a new download page dedicated to odbl based Openmtmaps/Velomaps. I excpect this to happen next week.
Incompatibility of Velomap and Openmtbmap on newer GPS devices if same country is sent both times including contourlines
Please note, as there were quite a few people reporting errors, I assume that this is due to sending both the velomap and the openmtbmap of the same country both times including contourlines.
Please Support Openmtbmap and Velomap by Donating some coins…
As it's a lot of work to run Openmtbmap and Velomap, and keep everything up to date and up to best possible technology, I ask you to donate some coins toward it if you haven't done so yet. Simply donate a bit after your next install of openmtbmap/velomap when you see the donation page. For people who already donated money, and want to prolong their account I'll soon set up a separate page for them. Also you will be reminded to stock up by email before your account expires and instructions on how to prolong it (7-14 days before it runs out).
Hallo,
ich bekomme per Newsletter immer die Kartenupdates der openmtbmap mit. Gilt das auch für die velomap oder ist hier noch der 7.April der aktuelle Kartenstand?
Gilt auch für die Velomaps. Wobei ich nicht bei jedem Update einen Newsletter schicke. Bis auf Ausnahmen sind immer ab Freitag oder Samstag wöchentlich geupdatete Karten downloadbar.
Ah sehr schön, dann habe ich schon zu lange gewartet.
Aber es ist jetzt sehr schön zu sehen wo all die Veränderungen sind die ich in den letzten Monaten in die OSM eingetragen habe. Bin mal gespannt wie sich die ganzen smoothness-Einträge die ich in meinem Umfeld gemacht habe auswirken.
Hallo, kann ich irgendwie auch bei den neuen openmtbmap News posten?
Ich habe zu der aktuellen News einen Vorschlag und einen Bugreport.
1) Den Tag man_made=dyke wäre vllt eine Berücksichtigung wert? Vielleicht quergestrichen o.ä., wenigstens für Wege. Z.B. im Wangerland laufen viele Wege parallel und man weiß ohne Ortskenntnis nie, ob man vor, auf oder hinter dem Deich fahren würde…
2) Der Bug bezieht sich noch auf das Kartenmaterial von Pfingsten, mangels GPS-Gerät kann ich es aktuell nicht nachkontrollieren. Ich poste es pro forma trotzdem noch nachträglich: Mir ist aufgefallen, dass bspw. das Hooksieler Tief (http://www.openstreetmap.org/?lat=53.59946&lon=7.97252&zoom=17&layers=M) in Basecamp mit beiden Designs angezeigt wurde. Auf meinem Edge 800 dann allerdings nicht, dort lief nur der parallele Weg durch die Felder. Einen Taggingfehler konnte ich damals nicht nachvollziehen, oder ein anderer User hatte zwischen Kartenerstellung und meiner Kontrolle bereits nachgebessert…
Grüße
Schelm
Nachtrag: Habe gerade mal wieder ein Update gemacht. Werden Wiesen, Farmyards, etc. demnächst auch entfernt? Im Moment sehe ich nämlich in vielen ländlichen Regionen so eine Art Masern, weil überall vereinzelte Weiden, die Bauernhöfe und beispielsweise Deichwiesen oder Wetlands drin sind und wirklich nur die Landwirtschaftsflächen / Felder entfernt wurden. Das sieht in meinen Augen etwas unglücklich aus. Alleine vom Kontrast her, weil die anderen Landnutzungen mit relativ starken Farben eingetragen sind und die Felder jetzt einfach mit Standardgrau getauscht wurden.
Vielleicht die Felder einfach mit einer ganz schwachen Einzelfarbe ohne Muster darstellen?
Grüße
Schelm
Wiesen sind so ein Problem. Weil in Städten braucht man sie, am Land aber nicht. Nur weiß ich nicht, wie ich das unterscheiden kann. Da gibt es leider AFAIK kein Merkmal in den Daten.
Farmyards habe ich nicht vor zu entfernen. Die Felder brauchen aber auch viel viel Datenplatz inzwischen, da sie häufig sehr detailliert eingetragen sind.
ich antworte dir Morgen genauer…
Wird es jetzt keine neuen Kartenversionen geben, bis die OSM Daten gemäß Lizenzumstellung reduziert wurden? Nach dem Serverwechsel Anfang April habe ich irgendwie keine weiteren Aktivitäten feststellen können und im OSM Forum habe ich gelesen, dass die wohl noch am Bot basteln. Aber einen vernünftigen Zeitplan finde ich da nirgends… Ich würde mich doch etwas ärgern, wenn meine umfangreichen Edits der letzten Zeit vor meinem Radurlaub nicht mehr in der Karte umgesetzt würden.
Ich werde Europa wohl bald nochmal updaten, den Rest eher mal nicht mehr – da ich dort die Karten alle auf grobe Fehler überprüft hab, und das nicht unbedingt nochmal machen möchte…
Hast Du vor, die Europakarte nochmal zu aktualisieren? Die ODBL-Umstellung zieht sich wohl noch ein wenig… Würde mich jedenfalls sehr freuen. Beste Grüße & Danke
noch ne Frage
gilt die Download beschreibung auch für mac user (bin ich)?
oder muß ich die beschreibung von Tom mit deiner kombinieren?
die downloads fang ich mal gleich an….
Am einfachsten du nutzt Qlandkarte GT, dann brauchst du gar nichts extra machen. Willst du unter Mac OSx die Karten mit Basecamp benutzen (wegen Autoroutingsupport etwa), dann müssen sie natürlcih erst konvertiert werden. Danach gilt halt nur einmal Höhenlinien auswählen.
BZW ich weiß nicht genau was du mit deiner Frage meinst.
Hi,
komme mit den donload usw mittlerweile klar (nur mit beschreibung von Tom) und hab mir auch schon einige karten geholt.
für meine Tour Anfang mai brauch ich velomap von czech, poland, sachsen, thueringen.
die hab ich alle einzeln mittlerweile auf meinem Oregon 450.
kann ich die als eine karte auch nutzen? oder muß ich bei jeder Grenze die Karte wechseln?
oder muß ich die Europakarte nehmen? (bisschen groß für mein oregon)
Danke für die tollen karten, ich habe von Gegenden, die ich gut kenn mal stichproben gemacht, die Karte ist echt gut (z.B. Bayern und alps in deutschland)
grüße
Herbert
Wenn du Länderübergreifend Autorouting nutzen willst, brauchst die Europakarten. Sonst reichen auch die kleineren Karten — allerdings gibt es dann evtl Probleme mit der Überlappung, sprich du musst ab und zu aktivieren/deaktivieren weil eine leere Karte die Karte mit Inhalt überdeckt.
Für sowas würde ich daher die Europakarte nehmen, und einen Auschnitt (großzügig den nehmen den du brauchst) aufs GPS schicken.
Hi, seems there is a problem with the rcn points, as they are not showing up on my edge 800 at all and only on some zooms on QLandkarte (and only showing digit for numbers >10)
Are you on the latest firmware?
Yes, I’m on 2.40
jetzt läufts ; )
guten morgen,
keine Fehlermeldung, der dowwnload läuft einfach nicht los (war bei czech velomap 0 problem)
ich probiers nochmal, vieleicht lags am netz
Gruß
Herbert
Hallo,
bin neu bei velomap
versuche gerade osm Karten für Radurlaub (Czech, Riesengebirge bis Dresden) zu laden.
karten sind dank Toms anleitung für mac bereits auf meinem Oregon450 auf sep Micro-sd
czech und Poland klappt, aber die östl Bundesländer (mb vorpommern, sachsen…) nicht.
liegts an mir?
freundliche Ostergrüße
Herbert
was klappt nicht? Fehlermeldung??